Pro Auto-Disk 

Powder Measure

Auto-Drum

Powder Measure

Commercial reloaders and competitive shooters first choice!

Best for reloading handgun cases.

May also be used to charge rifle cases with use of Double Disk Kit.

Elastomer wiper and teflon coated metal casting make this a smooth operating measure. Will not cut powder and almost totally eliminates leakage. Large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience. Increased safety with positive pull-back lever. Includes swivel adapter and spring return lever with spring and all four disks. Includes Auto-Disk volume data, simply insert the correct disk, and start powder charging.

If you are charging powder on a Turret Press, be sure to order the Auto-Disk Riser.

Best for reloading both handgun and rifle cases.

 Accurately dispsenses powder in your favorite cartridge, one of the nicest features is the ability to use quick change drums, that will reliabibly dispense 1 to 80 grains of powder. These low cost drums can be preset to your favorite charge and swapped out in seconds.

Auto-Drum features a machined body with a labyrinth groove. This mates to the precision molded quick change drums providing a leak free fit with the finest powders. The body features an elastomer wiper that prevents powder shearing. Works great with difficult metering extruded powders. All gears, springs and levers are located inside the die cast housing.

If you are charging powder on a Turret Press, be sure to order the Auto-Disk Riser.