COLLET DIE ONLY 17 REM
click here to view parts
COLLET DIE ONLY 204 RUGER
Click here to view parts
COLLET DIE ONLY 22 HORNET
Undersized Flash Hole Mandrel is sold separately
We can adjust your 22 Hornet Collet Necksizing Die to work with the 22 K Hornet. The cost for this service is $30.00 + any applicable taxes and Shipping/Handling. Send in your die and a sample fired case to our factory:
Lee Precision4275 County Road UHartford, WI 53027
Collet necksizing die only 22/250
COLLET DIE ONLY 220 SWIFT
COLLET DIE ONLY 222 REM
Undersized flash hole decap mandrel sold separately
Collet necksizing die only 223 Remington or 223 Ackley Improved
Undersized flash hole decap mandrel sold separately.
.002" undersize mandrel sold separately
Collet necksizing die only 300 PRC
Collet necksizing die only 7mm PRC
Collet necksizing die only 243 Winchester
.002" undersize decap mandrel sold separately.
Collet necksizing die only 6mm Remington or 244 Remington
Collet necksizing die only 6mm Creedmoor
Collet necksizing die only 25/06
Collet necksizing die only 257 Roberts or 257 Ackley Improved
Collet necksizing die only 260 Remington
Collet necksizing die only 6.5 Creedmoor.
COLLET DIE ONLY 6.5 GRENDEL
Collet necksizing die only 6.5 PRC
Collet necksizing die only 6.5 X 55 Swedish Mauser
Collet necksizing die only 270 Winchester
Collet necksizing die only 7mm Express/280 Remington or 280 Ackley Improved.
Collet necksizing die only 7mm Remington Magnum.
Collet necksizing die only 7MM/08.
Collet necksizing die only 7x57 Mauser
Collet necksizing die only 30/06.
Collet necksizing die only 30/30 Winchester or 30/30 Ackley Improved.
Collet necksizing die only 300 AAC Blackout.
Collet necksizing die only 300 H&H or 300 Weatherby MAG
Collet necksizing die only 300 HAM'R.
Collet necksizing die only 300 Win Mag
Collet necksizing die only 300 WSM.
Collet necksizing die only 308 Winchester
Collet necksizing die only 7.5 x 55 Swiss.
COLLET DIE ONLY 7.62X54
Collet necksizing die only 7.62 x 39 Russian
Our collet die set is designed to work with .308 diameter bullets. If you require a .310 or .311 diameter bullet, you will need to chamfer the case necks.
Collet necksizing die only 303 British.
Collet necksizing die only 8 X 57 Mauser
COLLET DIE ONLY 338 LAPUA
Note: If you are using a competitor's press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.
Collet necksizing die only 338 Winchester.
Collet necksizing die only 35 Remington.
Collet necksizing die only 375 H&H Magnum.
COLLET DIE ONLY 50 BMG
Lee Collet Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.
WARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov
WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
3 pack of Spline Drive Breech Lock bushings.
Breech lock quick change bushing with integral lock collar provides unmatched precision and convenience when adjusting dies. Split clamp positively locks die into position.