Handgun Bullet Molds
Exclusive Lee Bullet Mold features:
- Feature trochoidal venting on the mold face and sprue plate mating surface. Unique venting allows consistent and effortless fill out.
- All Lee mold blocks are machined from aluminum because of the exceptional molding qualities
- The mold cavities are CNC machined for unmatched roundness and size control
- Most bullets from Lee molds can be used as cast without sizing
Double Cavity Molds
All molds for pistol calibers are double cavity to speed casting. Handles and sprue plate are included.
Six Cavity Commercial Quality Molds
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price. Handles extra, but priced low enough so you can have a set for every pair of blocks.
Mold Lubing
To extend the life and operation of your mold, make sure to lube it using beeswax or an anti-seize lubricant, as recommended in the mold instructions.
View Bullet Mold preparation video for proper mold lubrication and smoking
If you don't see your desired mold, check out our custom services page.
WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.
358-150-1R Double Cavity Mold
Click here to view parts
Produces a .358 diameter 150 grain Semi Wad round nose bullet.
Handles included.
Ballistic Coefficient = .131
Bullet Overall Length = .643 inches
Distance from crimp groove to the nose of the bullet = .288 inches
358-158-RF 6 Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain round flat nose bullet.
Bullet Overall Length = .630 inches
Distance from the crimp groove to the nose of the bullet = .275 inches
358-158-RF Double Cavity Mold
Click here to view parts
Produces a .358 diameter 158 grain round nose bullet.
Handles included.
Ballistic Coefficient .160
Bullet Overall Length = .630 inches
Distance from the crimp groove to the nose of the bullet = .275 inches
365-95-1R Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .365 diameter 95 grain round nose bullet suitable for cartridges like 9mm Makarov.
Handles included.
Bullet Overall Length = .420 inches.
Distance from nose of the bullet to the first lube groove = .212 inches.
401-145-SWC Double Cavity Mold
Click here to view parts
Produces a .401 diameter 145 grain Semi Wad Cutter nose bullet
Handles included
Bullet Overall Length = .530 inches.
Distance from nose of the bullet to the first lube groove = .220 inches.
401-175 TC 6 Cavity Mold
Click here to view parts
Produces a .401 diameter 175 grain Truncated Cone nose bullet
Bullet Overall Length = .590 inches.
Distance from nose of the bullet to the first lube groove = .245 inches.
401-175-TC Double Cavity Mold
Click here to view parts
Produces a .401 diameter 175 grain truncated cone nose bullet
Handles Included
Bullet Overall Length = .590 inches.
Distance from nose of the bullet to the first lube groove = .245 inches.
41 Magnum Molds
410-195-SWC Double Cavity Mold
Click here to view parts
Produces a .410 diameter 195 grain Semi Wad Cutter nose bullet
Handles included
Bullet Overall Length = .643 inches.
Distance from crimp groove to the nose of the bullet = .284 inches.
429-200-RF 6 Cavity Mold
Click here to view parts
Lee 6 cavity block produces a .429 diameter 200 grain round nose with flat metplat bullet suitable for cartridges like 44 Special, 44 Magnum, and 44/40.
429-200-RF Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .429 diameter 200 grain round with flat bullet suitable for cartridges like 44 Spec, 44/40, etc.
Handles included
Bullet Overall Length = .598 inches.
Distance from crimp groove to the nose of the bullet = .267 inches.
429-214-SWC Double Cavity Mold
Click here to view parts
Lee Double Cavity Mold produces a .429 diameter 214 grain Semi Wad Cutter nose bullet suitable for cartridges like 44 Spec, 44/40, etc.
Handles included.
Bullet Overall Length = .665 inches.
Distance from crimp groove to the nose of the bullet = .300 inches.