Lee Precision, Inc. Reloading Tools and Equipment: Lee Load-Master

LOAD-MASTER

The finest reloader made!

A massive press with advanced features. The ram is 1 3/4 inches in diameter. Stroke and clearance sufficient for the largest magnum rifle cases.

Loads rifle and pistol rounds with equal ease.

Load progressively or singly without spilled powder or components.

Five stations so you can Factory Crimp and post size.

Accepts all popular brands of dies (7/8 x 14)

Automatic indexing with a wedge lock mechanism that will actually hold a ton .

Positive and foolproof priming system that is easy and fast to fill.

Removable turrets. Change calibers in seconds.

Automatic 4 tube case feeder (Pistol calibers)

Loaded round ejector and case catcher

Quick change shell plate. No tools required.

Grease and oil fittings along with hard chrome plated ram insure a lifetime of service for even the commercial reloader.

Easy to empty primer catcher guaranteed to catch every primer.

This press will convince you that Lee is the quality leader. Every part of this tool was designed to be strong, long lasting, rust-resistant and user friendly. This machine is designed for a life-time of the hardest use.

Precision 5-Hole Turret with 20 locking lugs takes just seconds to change

90079 $14.98

Shell Plate $29.98

#1s 90907 38 Spl, 357 Mag., etc.

#2L 90908 45 ACP, 30/06, 308, etc.

#3L 90909 30/30, 7 x 30 Waters, etc.

#4s 90910 223, 222, etc.

#4A 90059 32 S&W Long, 32 H&R Mag., etc.

#5L 90911 Belted Magnums, 300 Mag., etc.

#5A 90085 303 British & 30/40 Krag

#6s 90912 32/20, 25/20, etc.

#7s 90884 22 Hornet

#7a 90913 30 M1 Carbine, 32 ACP

#8L 90914 45/70, 348 Win.

#9L 90915 41 Magnum

#10L 90916 220 Swift, 6.5 Jap.

#11L 90917 44 Mag., 44 Spl., 45 Colt

#12L 90918 7.62 x 39, 6mm PPC, 22 PPC, etc.

#14L 90919 44/40, 38/40, 45 Colt

#19s 90920 9mm Luger, 40 S&W, 38 Super, etc.

#19L 90068 10mm Auto

Check shell holder chart on Priming Tools page for further listings.

READY TO LOAD PISTOL CALIBERS are equipped with carbide dies, Pro Auto-Disk Powder Measure and a case feeder. $330.00

32 S&W Long, 32 H&R Magnum 90935

Loaded Round Catcher

9mm Luger 90936

380 Auto 90937

38 Spec. (will load 357 Mag.) 90938

40 S&W 90940

10mm Auto 90941

44 Spec. (will load 44 Mag.) 90943

44 Magnum 90944

45 ACP 90945

45 Colt (will load 454 Casull) 90946

Special sizes can be made with any die set listed in this catalog for the same prices listed above. Please contact the factory.

RIFLE CALIBERS are equipped with Lee Pace-Setter dies, Perfect Powder Measure, Universal Charge Die and case inserter. (no case feeder) $320.00

223 Remington 90922

270 Winchester 90926

308 Winchester 90930

30/06 90931

Special sizes can be made with any die set listed in this catalog for the same prices listed above. Please contact the factory.

Large Primer Feeder 90077 $24.98

Small Primer Feeder 90075 $24.98

LARGE CASE FEEDER 90658 $25.00

38 SPECIAL 357 MAGNUM 41 MAGNUM 44 SPECIAL 44 MAGNUM 45 ACP 45 COLT 10mm AUTO 7.62 x 39 RUSSIAN

40 S&W uses the Large Case Feeder with a small slider.

SMALL CASE FEEDER 90659 $25.00

9mm LUGER 380 AUTO 32 AUTO 32 S&W LONG 32 H&R MAGNUM 38 AUTO 38 SUPER

RIFLE CASE FEEDER 90663 $25.00

222 223 30 M1

Extra Case Feeder Tubes (7 PACK) 90661 $7.98

Case Collator
Fills all four tubes in just ten seconds.

For the Pro 1000 or Load Master

90667 $14.98

Adjustable Charge Bar 90792 $9.98

Bullet Feed Kit
The bullet feeder designed to directly fit the Pro 1000 and Load-Master. Automatically feeds bullets into the mouth of the seating die. Align bullets more accurately than possible by hand. Increases the cyclic rate 50 to 100%.
The Bullet Feed Kit is complete for one bullet diameter and range of length. To convert to another caliber or bullet length select appropriate Feed die & finger.

Order from chart below. $29.98

Feed KitsComplete

$29.98
Description
Feed Die and Fingers

$14.98

90892 30 & 32 cal Bullets up to .60 long 90885

90893 9mm through .365 diameter up to .46 long 90886

90894 9mm through .365 diameter .46 to .60 long 90887

90895 9mm through .365 diameter .60 to .75 long 90888

90896 40 cal through .44 cal up to .65 long 90889

90897 40 cal through .44 cal .65 to .80 long 90890

90898 45 cal bullets up to .67 long 90891

Multi-Tube Adapter for Bullet Feed Kit
Four tube magazine keeps Lee Bullet Feeder fed with a continuous supply of bullets. Quickly and easily installed. Includes large and small adapters, four large and small feed tubes and cylinder, plate assembly.

90280 $25.00

Every Lee Reloading Tool is unconditionally guaranteed for two full years.

Back to Top

Lee Dies | Large Series Dies | Rifle Full Length Dies | Pistol Dies | Crimp Dies
Collet Dies | Deluxe Rifle Dies | Bullet Molds | Lube and Sizing | Melters
Reloading Presses | Press Kits | Turret Press | Classic Turret Press | Classic Cast
Pro 1000 | Load Master | Lee Load All | Case Conditioning Tools | Priming Tools
Disk Powder Measure | Perfect Powder Measure
Lee Aniversary Kit | Deluxe Turret Press Kit | Lee Loader
Shooter Program | Modern Reloading | Apparel | Surplus Items

Request paper catalog 90495

4275 HIGHWAY U
HARTFORD WISCONSIN 53027
262-673-3075 Voice
262-673-9273 FAX

For product and ordering questions, please review our Frequently Asked Questions page.

Download the Lee Precision products list. products.txt 84K
Download the Lee Precision bill of materials. parts.txt approximately 700K
Netscape users hold down the SHIFT key while you click on the file name above.
MSIE users click the right mouse button on the file name.
MAC users can click on the file name and hold - then choose to download.

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997

Back to Top

Hosted by Pictor Design This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0 Direct website questions to the Webmaster http://www.leeprecision.com Revised Published 25-Aug-1997

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997