|
CRIMPING DIES
Overcomes the
Factory Advantage!
RIFLE
Lee Factory Crimp Die:
- Crimps the bullet in place more firmly than any other tool.
- It is impossible to buckle the
case as with regular roll crimp dies.
- Trim length is not critical.
- Tests demonstrate that
even bullets which have no cannelure will shoot more accurately if crimped in place with
the Lee Factory Crimp Die.
|
Factory ammunition is often more accurate and better able to withstand rough handling because the bullet is firmly crimped in place. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical.
Until now, handloaders seated the bullet to touch the rifling to achieve similar results. This is not always possible nor desirable. The Lee Factory Crimp Die is included at no extra charge with Lee PaceSetter Dies. It's just another added value that only Lee Dies offer. |
Lee Taper Crimp Die
The Lee Taper Crimp Dies is hardend steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used wth 1986 or newer Lee Dies as the crimp angle is already modified taper crimp. Jacketed bullets must have a crimp groove. |
|
| CALIBER |
FACTORY CRIMP DIE
$13.98 |
| 22 HORNET |
90829 |
| 218 BEE |
90830 |
| 222 REMINGTON |
90816 |
| 223 |
90817 |
| 22/250 |
90818 |
| 220 SWIFT |
90831 |
| 243 WINCHESTER |
90819 |
| 6mm REMINGTON |
90832 |
| 243 WSSM |
90187 |
| 25/20 |
90833 |
| 250 SAVAGE |
90834 |
| 257 ROBERTS |
90835 |
| 25/06 |
90836 |
| 6.5 X 55 |
90837 |
| 6.8 SPC |
90735 |
| 260 REMINGTON |
90977 |
| 270 WINCHESTER |
90820 |
| 7/30 WATERS |
90838 |
| 7 X 57 MAUSER |
90839 |
| 7mm/08 |
90840 |
| 7mm EXPRESS / 280 REM |
90841 |
| 7mm REM MAGNUM |
90821 |
| 7mm STW |
90869 |
| 7.5 X 55 SWISS |
90184 |
| 7.62 X 39 RUSSIAN |
90827 |
| 7.62 X 54 RUSSIAN |
90842 |
| 32/20 |
90851 |
| 30 M-1 |
90421 |
| 30/40 KRAG |
90843 |
| 30/30 WINCHESTER |
90822 |
| 30/284 |
90066 |
| CALIBER |
FACTORY CRIMP DIE
$13.98 |
| 308 WINCHESTER/303 SAVAGE |
90823 |
| 300 WSM |
90331 |
| 300 SAVAGE |
90844 |
| 30/06 SPRINGFIELD |
90824 |
| 300 WIN MAGNUM |
90825 |
| 300 H&H |
90970 |
| 300 WHBY MAGNUM |
90845 |
| 300 ULTRA MAG |
90970 |
| 7.65 ARG MAUSER |
90846 |
| 7.7 JAPANESE |
90847 |
| 303 BRITISH |
90826 |
| 8 X 57 MAUSER |
90848 |
| 338 WINCHESTER |
90849 |
| 348 WINCHESTER |
90857 |
| 358 WINCHESTER |
90904 |
| 35 REMINGTON |
90828 |
| 375 H&H |
90850 |
| 416 REMINGTON |
90906 |
| 32-20 |
90851 |
| 38-40 |
90852 |
| 38-55 |
90853 |
| 375 WINCHESTER |
90905 |
| 44/40 |
90854 |
| 444 Marlin |
90855 |
| 45/70 GOVERNMENT |
90856 |
| 458 WINCHESTER MAGNUM |
90969 |
| If you don't see your
caliber listed, check out our custom
services page. |
PISTOL
For Handgun Ammunition That Must Work!
Lee Carbide Factory Crimp Die
A carbide sizer sizes the cartridge while it is being crimped so every round will positvely chamber freely with factory like dependability. The adjustig screw quickly and easily sets the desired amount of crimp. It is impossible to buckle the case as with a conventional bullet seating die. Trim length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. Revolver dies roll crimp with no limit as to the amount. A perfect taper crimp is applied to auto-loader rounds. The crimper cannot be misadjusted to make a case mouth too small to properly head-space. A firm crimp is essential for dependable and accurate ammunition. It eliminates the problems of poor ignition of slow burning magnum powders. |
|
Lee Taper Crimp Die
The Lee Taper Crimp Dies is hardend steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used wth 1986 or newer Lee Dies as the crimp angle is already modified taper crimp. Jacketed bullets must have a crimp groove. |
|
 Lee Bottle Neck Pistol Factory Crimp Die
|
|
| CALIBER |
Carbide Factory Crimp Die $21.98
|
Taper Crimp Die $12.98
|
Bottle
Neck Pistol Factory Crimp Die $25.00 |
30 Luger
|
|
|
90175 |
| 30
Mauser & 30 Tokarev |
|
|
90086 |
| 7.62
Tokarev |
|
|
90086 |
32 S&W
Long
|
90067 |
90779 |
|
| 32
H&R Mag. |
90067 |
90779 |
|
| 9mm
Luger |
90860 |
90780 |
|
| 357
Sig |
|
|
90076 |
| 38
Super / 38 ACP |
90866 |
90780 |
|
| 380
Auto |
90867 |
|
|
38 Special
|
90861 |
90781 |
|
357 Magnum
|
90861 |
90781 |
|
40 S&W
|
90862 |
90782 |
|
| 10mm
Auto |
90862 |
90782 |
|
| 41 MAGNUM |
90416 |
|
|
44 SPECIAL
|
90863 |
90784 |
|
| 44 MAGNUM |
90863 |
90784 |
|
| 44 RUSSIAN |
90863 |
|
|
| 45 COLT |
90865 |
90786 |
|
| 45 ACP |
90864 |
90785 |
|
| 45 AUTO RIM |
90864 |
90785 |
|
| 45 Schofield |
90864 |
90785 |
|
| 400 Cor Bon |
|
|
90173 |
| 455
Webley Mark II |
90865 |
90785 |
|
| 45 WIN MAGNUM |
90864 |
90785 |
|
| 454 CASULL |
90865 |
90786 |
|
| 45 GAP |
90864 |
|
|
| If you don't see your
caliber listed, check out our custom
services page. |
Meet A Satisfied Customer!
Randy S. from Bowdon, GA:
I just purchased one of
your factory crimp dies in .223 Rem caliber and I have to tell you that this die is
probably the best idea since sliced bread. While I was adjusting the die, I made several
dummy rounds, and found out that no matter what, you can't collapse a case shoulder. The
crimp is beautiful and it made my extreme velocity spread shrink drastically. So if this
is representative of your products, rest assured that my next set of dies will be Lee
dies.
|
Request paper catalog 90495