After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length Gauge (Pilot) and Shell Holder must be ordered as Case Length Gauge and shell holder for each caliber. Scroll down for product numbers.
Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. |
 Lock Stud |
 Cutter |
| Cutter & Lock Stud |
90110 |
5.98 |
 Large Cutter & Lock Stud must be used for .475 and larger caliber
| Lock Stud |
 Large Cutter |
| Large Cutter & Lock Stud |
90401 |
9.98 |
| Chamfer Tool |
| Must be used after Case Trimming. Unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside of case necks. Can also be used to remove the crimp from primer pockets of G.I. brass. Works better than tools costing several times as much. |
| LEE CHAMFER TOOL |
90109 |
2.98 |
| Primer Pocket Cleaner |
| Double ended design cleans both large and small primer pockets. Primers can be fully seated for better accuracy and safety. Costs so little and works so well, no reloader can afford to be without one. |
| LEE POCKET PRIMER CLEANER |
90101
|
1.98
|
| Decapper and Base |
| Easily removes crimped in primers from military cases. Guaranteed unbreakable. |
| 22 CALIBER |
90103
|
4.98
|
| 30 CALIBER |
90102 |
4.98 |
| Decapping Die |
|
An absolute must for those who clean
cases before reloading. Cases need not be clean
nor lubed when using this die. Tough, almost
unbreakable decapper easily removes crimped in
primers. One size fits all.
A link to an interesting article
by Mark Trope
http://www.surplusrifle.com/shooting2006/tworeloadingtools/index.asp |
| Lee Decapping Die |
90292
|
10.98 |
| Replacement Decapper |
90783
|
2.00 |
LEE ZIP TRIM
|
|
Shown with cutter and chamfer tool not included.
|
Trimming cases is a fact of life if you reload rifle cases. This task has always been
accomplished with tools that require one to hand crank a cutter or resort to an expensive
electric unit. The Zip Trim changes the way reloaders prepare cases for reloading. The Zip
Trim rotates the case like a lathe. This allows you to trim, chamfer and polish your case
without having to remove the case from the tool. Other trimmers hold the case fixed and
rotate the cutter.
What really makes the Zip Trim unique is the crank has been thrown away and is replaced
with a recoil mechanism like you would find on a small engine. One pull of the Zip Trim
cord quickly trims the longest case and just part of a pull chamfers the case mouth. If you
like shinny cases touch the spinning case with steel wool or polishing cloth and you get an
instant jewel like finish on your case.
Zip Trim
90899
24.98
The perfect cutter to use with
the Lee Zip trim:
 |
CUTTER only with BALL GRIP
|
90275 |
5.98 |
 Three Jaw Chuck works with any case from 25 ACP to the largest belted
magnums. Three hardened steel jaws gently center the case while the spindle
squares and locks the case head. Cases are installed and removed with
a fraction of a turn.
Three Jaw Chuck 90608
15.98
Optional case spinner spindle with drill shank for use with the Three
Jaw chuck, turns any electric drill into a high speed case
polisher/lathe. Also works great to hold cases for neck turning or
trimming.
Case Spinner Stud 90607
3.98
CASE LENGTH GAUGE with  SHELLHOLDER
4.98
Specify Caliber From List Of Sizes.
Case Length Gauge
|
 Shellholder
|
 Don't forget, you will need a CUTTER AND LOCK STUD to go along with the CASE LENGTH GAUGE AND SHELLHOLDER!
| 22 Hornet |
90111 |
308 WIN |
90139 |
| 221 Fireball |
90112 |
30/06 Springfield |
90140 |
| 222 REM |
90113 |
300 H&H / 300 Rem. Ultra Mag |
90141 |
| 223 REM |
90114 |
300 WIN MAG |
90142 |
| 223 WSSM |
90673 |
300 WHBY MAG |
90143 |
| 22/250 |
90116 |
303 British |
90144 |
| 220 Swift |
90118 |
32/20 W.C.F. |
90146 |
| 243 WIN |
90119 |
7.7 Japanese |
90115 |
| 243 WSSM |
90389 |
8 x 57 Mauser |
90148 |
| 6mm REM (244 Rem.) |
90120 |
338 WIN MAG |
90149 |
| 25/20 W.C.F. |
90121 |
35 REM |
90150 |
| 250 Savage (250/3000) |
90122 |
35 Whelen |
90972 |
| 257 Roberts |
90123 |
375 WIN |
90165 |
| 25/06 REM |
90124 |
375 H&H |
90164 |
| 6.5 Carcano |
90043 |
444 Marlin |
90151 |
| 6.5 x 55 Mauser |
90126 |
45/70 Government |
90152 |
| 260 Remington |
90993 |
458 Win Mag |
90971 |
| 6.8 REM SPC |
90189 |
32 Smith & Wesson Long |
90169 |
| 270 WIN |
90128 |
9mm Makarov |
90684 |
| 270 WSM |
90117 |
9mm Luger |
90153 |
| 284 WIN |
90129 |
380 Auto |
90155 |
| 7 x 57 Mauser |
90130 |
38 Smith & Wesson |
90156 |
| 7mm/08 |
90167 |
38 Special |
90157 |
| 7mm Express/280 Rem. |
90166 |
38-55 |
90994 |
| 7mm REM MAG |
90131 |
357 MAG |
90158 |
| 7mm WSM |
90314 |
40 S&W |
90154 |
| 7 x 64 Brenneke |
90236 |
10mm Auto |
90127 |
| 7.5 Swiss (Schmidt-Rubin) |
90132 |
41 MAG |
90159 |
| 7.5 x 54 MAS |
90051 |
44/40 |
90168 |
| 7.62 x 39 Russian |
90133 |
44 Special |
90160 |
| 7.62 x 54 Russian |
90147 |
44 MAG |
90161 |
| 7.65 Mauser (Belgian-Arg.) |
90134 |
45 ACP |
90162 |
| 30 M1 Carbine |
90135 |
45 Colt |
90163 |
| 30/30 WIN |
90136 |
454 Casull |
90992 |
| 30/40 Krag |
90137 |
 480 Ruger |
90018 |
| 300 Savage |
90138 |
500 S&W |
90019 |
| 300 WSM |
90034 |
50 BMG ($20.00) |
90010 |
Requires Large Cutter 
Unlisted case length gauges can be custom made, please check out our custom services page. |
Request paper catalog 90495