All Lee Mold Blocks are made from aluminum because of the exceptional molding qualities.

The mold cavities are lathe bored for unmatched roundness and size control.

Only Lee guarantees roundness of .001 or less.

Most bullets from Lee molds can be used as cast without sizing.

Micro Band Bullets usually require no sizing

A great innovation possible only because of Lee Liquid Alox Lubricant. The bullet shank has many shallow grooves for maximum lubricant retention. They all have a bevel base just behind a solid driving band. A great way to make bullets in quantity with minimum time, effort and equipment. More accurate than ordinary cast bullets.

For Available Bullet Molds go Here

For Black Powder Molds go Here

For Shotgun Slug Molds go Here

Click here to read an interesting article by Mark Trope

LEAD HARDNESS TESTING KIT

	Hardness Testing Kit Featured product in Chapter 10 of Modern Reloading. No more wasted components shooting too soft or too hard lead. Cast and load with confidence knowing your alloy is up to the job. Quickly and precisely check hardness of your lead alloy. Exclusive conversion chart tells the maximum operating pressure of any lead alloy. Kit includes calibrated hardened steel ball indenter "v" block cradle snaps into standard press ram 20 power 4 lens optical measuring microscope.
LEE HARDNESS TESTING KIT	90924	60.00

Read more about the Lee Hardness Test Kit

WARNING

Meet Some Satisfied Customers!

Ricky F. from Taylors, SC:
My cousin and I are reloaders. I use FMC bullets sometimes but mostly I use your molds to mold my bullets, they are great. Your bullet molds mold bullets so accurate at weight and round and are very smooth. When you look at factory bullets, Winchester, Remington, Federal they are so wrinkled, other brands too. Lee molds and my knowledge make the perfect bullet. Your molds cost less than others, are light weight, heat up quickly and come with the handles. Keep up the good work.

Henry O. from Ontario, Canada:
First of all, let me thank you. You've simplified both bullet casting and bullet clubbing.
It all started in Nov. of 1992 when I purchased your Tumble Lube 430-240-SWC aluminum mold for a price of $23.60 Canadian. I own several cast iron molds but this was my first aluminum mold. I cleaned them, smoked the cavities and lubricated the necessary parts. The mold was brand new and much to my surprise, after only 11 fillings I was producing perfect bullets. I couldn't believe it. It couldn't be this easy, but it was. I haven't used a cast iron mold since.
My second surprise was your liquid alox bullet lubricant for which your tumble lube bullets were designed for. I was a bit hesitant about using the liquid alox as I knew of no one else who used this product. Again, I thought it couldn't be this easy.
Lastly came the test. I loaded 100 rounds behind xx grains of Hercules Bullseye powder and fired them from 25 yards in my Smith & Wesson Model 29, 44 magnum 8 3/8" barrel. Accuracy was excellent but I expected to find a barrel full of lead fouling. Again I was surprised, very little leading. I haven't inserted another hollow stick of lube in my RCBS Lubamatic since.
I have since purchased your Tumble Lube bullet molds in 38, 9mm and 45 with equal satisfaction. I am extremely satisfied with your tumble lube bullets and the liquid alox bullet lube. Congratulations on these fine products.