Minie Bullet Mold

	Automatic Core Pin Mold. Open the mold upside down to empty. Close it and you're ready to cast the next. The core pin automatically centers in the mold. Easily cast 200 per hour. A quality mold built to last as long as your rifle. COMPLETE WITH HANDLES and AUTOMATIC CORE PIN
Original Style Minie Bullet
58 Caliber	575-500M	90481	$25.98

Improved Minie, Traditional Design

	Automatic Core Pin Mold. Open the mold upside down to empty. Close it and you're ready to cast the next. The core pin automatically centers in the mold. Easily cast 200 per hour. A quality mold built to last as long as your rifle. COMPLETE WITH HANDLES and AUTOMATIC CORE PIN
45 Cal.	.450-294M	90467	$25.98
45 Cal.Oversize	.454-298M	90469	$25.98
50 Cal.	.500-360M	90472	$25.98
54 Cal.	.533-410M	90473	$25.98
54 Cal.Oversize	.540-415M	90474	$25.98
58 Cal.	.575-472M	90476	$25.98
58 Cal.Oversize	.578-478M	90478	$25.98
Improved design is easier to cast and load. Usually more accurate; a wider variety of sizes.

Modern Minie, Target Design  

	Automatic Core Pin Mold. Open the mold upside down to empty. Close it and you're ready to cast the next. The core pin automatically centers in the mold. Easily cast 200 per hour. A quality mold built to last as long as your rifle. COMPLETE WITH HANDLES and AUTOMATIC CORE PIN
50 Cal.	.500-354M	90471	$25.98
58 Cal.	.575-470M	90475	$25.98
The most accurate of all Minies. Makes nice, clean holes in the target. The first choice for higher scores.

Round Ball Molds

Have tangential cut off which eliminates the objectional nib at the sprue. SINGLE CAVITY WITH HANDLES 20.98 DOUBLE CAVITY WITH HANDLES 24.98

R E A L Bullet for Muzzleloaders

RIFLING ENGRAVED AT LOADING

• A solid bullet that loads easily even after many firings because of its unique cleaning action.
• Will not tumble.
• A perfect hunting bullet with heavy loads.
• Easy to cast.
• Shoots accurately even in greatly oversize barrels.

		SINGLE CAVITY W/ HANDLES $20.98 DOUBLE CAVITY W/ HANDLES $25.98
	Grains	Single	Double
45 Cal.	200		90390
45 Cal.	250	90391	90392
50 Cal.	250	90393	90394
50 Cal.	320	90395	90396
54 Cal	300	90397	90398
54 Cal.	380	90399	90400
58 Cal.	440	90403	90404

Rifling . Engraved . At . Loading. - The driving bands are large enough to adequately engage the rifling when pushed into the muzzle, and thin enough to withstand maximum charges without stripping or gas cutting.

Unique Cleaning Action - You can shoot all day without cleaning your rifle between shots! When inserted into the muzzle, tiny scraping edges are swagged forward on each driving band. These perfect fitting scrapers remove the fouling from the previous shot.

Easier, Faster to Load - It's easy to load straight and true, easier and faster than a round ball with patch. Easily stabilized with very light charges, the R. E. A. L. bullet also retains accuracy with maximum loads. Each band is generously tapered to the rear with an angle close to that of a lathe center, so as to center the bullet against the rifle bands. When pushed in, the bullet automatically centers in the bore.

More Accurate - The bevel base of the R. E. A. L. bullet contributes to greater accuracy. When the bullet exits the bore, the gas escapes equally around the perimeter of the base. The uniform bevel is resistant to nicks that would permit gas to escape prematurely and cause a jet effect on one side of the bullet.

Combo Molds

Conical Bullet Mold

for black powder revolvers

A super accurate bullet that is easy to load straight and true. Two lube grooves prevent flash ignition and lead fouling. More energy and far greater accuracy than round balls.

	$20.98 Single	$25.98 Double
36 Cal. 375-130-IR		90378
44 Cal. Rem. 450-200-IR	90381	90382
44 Ruger Old Army 456-220-1R	90383	90384

SHOTGUN MOLDS

Make your own slugs for just pennies!

Load slugs for less than standard trap loads. The Lee DRIVE KEY (patent rights reserved) slug is loaded in standard trap hull with standard wad and conventional folded crimp. Slug loads are produced with any standard shot shell reloading press. Lee Slug Mold features the exclusive drive key. The drive key positively rotates the slug in rifled shotgun barrels. The key doubles as a support rib allowing use of a standard trap wad - no need for a support wad or base filler. Sabot wad design outperforms rifled slugs in rifled slug barrels. Velocity and accuracy meet and exceed expensive factory loaded rifled slugs. Molds feature self centering automatic core pins for maximum speed and convenience. Mold is complete with sprue plate, handles and complete instructions with suggested loads. Best of all, they're priced at what others charge for handles alone!

WARNING

Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.