Lee Precision, Inc. Reloading Tools and Equipment: Lee Load-Master

LOAD-MASTER

The finest reloader made!

A massive press with advanced features. The ram is 1 3/4 inches in diameter. Stroke and clearance sufficient for the largest magnum rifle cases.

Loads rifle and pistol rounds with equal ease.

Load progressively or singly without spilled powder or components.

Five stations so you can Factory Crimp and post size.

Accepts all popular brands of dies (7/8 x 14)

Automatic indexing with a wedge lock mechanism that will actually hold a ton .

Positive and foolproof priming system that is easy and fast to fill.

Removable turrets. Change calibers in seconds.

Automatic 4 tube case feeder (Pistol calibers)

Loaded round ejector and case catcher

Quick change shell plate. No tools required.

Grease and oil fittings along with hard chrome plated ram insure a lifetime of service for even the commercial reloader.

Easy to empty primer catcher guaranteed to catch every primer.

This press will convince you that Lee is the quality leader. Every part of this tool was designed to be strong, long lasting, rust-resistant and user friendly. This machine is designed for a life-time of the hardest use.

Precision 5-Hole Turret with 20 locking lugs takes just seconds to change

90079 Serv.Parts $14.98

Shell Plate $29.98

#1s 90907 Serv.Parts 38 Spl, 357 Mag., etc.

#2L 90908 Serv.Parts 45 ACP, 30/06, 308, etc.

#3L 90909 Serv.Parts 30/30, 7 x 30 Waters, etc.

#4s 90910 Serv.Parts 223, 222, etc.

#4A 90059 Serv.Parts 32 S&W Long, 32 H&R Mag., etc.

#5L 90911 Serv.Parts Belted Magnums, 300 Mag., etc.

#6s 90912 Serv.Parts 32/20, 25/20, etc.

#7s 90884 Serv.Parts 22 Hornet

#7a 90913 Serv.Parts 30 M1 Carbine, 32 ACP

#8L 90914 Serv.Parts 45/70, 348 Win.

#9L 90915 Serv.Parts 41 Magnum

#10L 90916 Serv.Parts 220 Swift, 6.5 Jap.

#11L 90917 Serv.Parts 44 Mag., 44 Spl., 45 Colt

#12L 90918 Serv.Parts 7.62 x 39, 6mm PPC, 22 PPC, etc.

#14L 90919 Serv.Parts 44/40, 38/40, 45 Colt

#19s 90920 Serv.Parts 9mm Luger, 40 S&W, 38 Super, etc.

#19L 90068 Serv.Parts 10mm Auto

Check shell holder chart on Priming Tools page for further listings.

READY TO LOAD PISTOL CALIBERS are equipped with carbide dies, Pro Auto-Disk Powder Measure and a case feeder. $350.00

32 S&W Long, 32 H&R Magnum 90935 Serv.Parts

Loaded Round Catcher

9mm Luger 90936 Serv.Parts

380 Auto 90937 Serv.Parts

38 Spec. (will load 357 Mag.) 90938 Serv.Parts

40 S&W 90940 Serv.Parts

10mm Auto 90941 Serv.Parts

44 Spec. (will load 44 Mag.) 90943 Serv.Parts

44 Magnum 90944 Serv.Parts

45 ACP 90945 Serv.Parts

45 Colt (will load 454 Casull) 90946 Serv.Parts

Special sizes can be made with any die set listed in this catalog for the same prices listed above. Please contact the factory.

RIFLE CALIBERS are equipped with Lee Pace-Setter dies, Perfect Powder Measure, Universal Charge Die and case inserter. (no case feeder) $350.00

223 Remington 90922 Serv.Parts

270 Winchester 90926 Serv.Parts

308 Winchester 90930 Serv.Parts

30/06 90931 Serv.Parts

Special sizes can be made with any die set listed in this catalog for the same prices listed above. Please contact the factory.

Large Primer Feeder 90077 Serv.Parts $24.98

Small Primer Feeder 90075 Serv.Parts $24.98

LARGE CASE FEEDER 90658 Serv.Parts $25.00

38 SPECIAL 357 MAGNUM 41 MAGNUM 44 SPECIAL 44 MAGNUM 45 ACP 45 COLT 10mm AUTO 7.62 x 39 RUSSIAN

40 S&W uses the Large Case Feeder with a small slider.

SMALL CASE FEEDER 90659 Serv.Parts $25.00

9mm LUGER 380 AUTO 32 AUTO 32 S&W LONG 32 H&R MAGNUM 38 AUTO 38 SUPER

RIFLE CASE FEEDER 90663 Serv.Parts $25.00

222 223 30 M1

Extra Case Feeder Tubes (7 PACK) 90661 Serv.Parts $7.98

Case Collator
Fills all four tubes in just ten seconds.

For the Pro 1000 or Load Master

90667 Serv.Parts $14.98

Adjustable Charge Bar 90792 Serv.Parts $9.98

Bullet Feed Kit
The bullet feeder designed to directly fit the Pro 1000 and Load-Master. Automatically feeds bullets into the mouth of the seating die. Align bullets more accurately than possible by hand. Increases the cyclic rate 50 to 100%.
The Bullet Feed Kit is complete for one bullet diameter and range of length. To convert to another caliber or bullet length select appropriate Feed die & finger.

Order from chart below. $33.98

Feed KitsComplete

$34.98
Description
Feed Die and Fingers

$14.98

90892 Serv.Parts 30 & 32 cal Bullets up to .60 long 90885 Serv.Parts

90893 Serv.Parts 9mm through .365 diameter up to .46 long 90886 Serv.Parts

90894 Serv.Parts 9mm through .365 diameter .46 to .60 long 90887 Serv.Parts

90895 Serv.Parts 9mm through .365 diameter .60 to .75 long 90888 Serv.Parts

90896 Serv.Parts 40 cal through .44 cal up to .65 long 90889 Serv.Parts

90897 Serv.Parts 40 cal through .44 cal .65 to .80 long 90890 Serv.Parts

90898 Serv.Parts 45 cal bullets up to .67 long 90891 Serv.Parts

Multi-Tube Adapter for Bullet Feed Kit
Four tube magazine keeps Lee Bullet Feeder fed with a continuous supply of bullets. Quickly and easily installed. Includes large and small adapters, four large and small feed tubes and cylinder, plate assembly.

90280 Serv.Parts $25.00

Every Lee Reloading Tool is unconditionally guaranteed for two full years.

Back to Top

Lee Dies | Large Series Dies | Rifle Full Length Dies | Pistol Dies | Crimp Dies
Collet Dies | Deluxe Rifle Dies | Bullet Molds | Lube and Sizing | Melters
Reloading Presses | Press Kits | Turret Press | Classic Turret Press | Classic Cast
Pro 1000 | Load Master | Lee Load All | Case Conditioning Tools | Priming Tools
Disk Powder Measure | Perfect Powder Measure
Lee Aniversary Kit | Deluxe Turret Press Kit | Lee Loader
Shooter Program | Modern Reloading | Apparel | Surplus Items

Request paper catalog 90495

4275 HIGHWAY U
HARTFORD WISCONSIN 53027
262-673-3075 Voice
262-673-9273 FAX

For product and ordering questions, please review our Frequently Asked Questions page.

Download the Lee Precision products list. products.txt 84K
Download the Lee Precision bill of materials. parts.txt approximately 700K
Netscape users hold down the SHIFT key while you click on the file name above.
MSIE users click the right mouse button on the file name.
MAC users can click on the file name and hold - then choose to download.

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997

Back to Top

Hosted by Pictor Design This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0 Direct website questions to the Webmaster http://www.leeprecision.com Revised Published 25-Aug-1997

Hosted by Pictor Design
This publication is formatted for Microsoft Internet Explorer 3.02 and Netscape 3.0
Direct website questions to the Webmaster
http://www.leeprecision.com
Revised
Published 25-Aug-1997