Product Infomation
Click here to view parts
Lee 22 Steel 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, and Instructions/Load data.
If you wish to utilize a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set, you will need to purchase the short charging die # 90668.
If you intend to load 22 TCM 9R ammunition, you will need to have a custom bullet seating plug made and mail in a sample 9R bullet along with your bullet seating die for adjustment.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 5.7x28 Steel 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and Instructions/Load data.
If you wish to utilize a Lee Pro Auto-Disk or Auto-Drum Powder Measure with this die set, you will need to purchase the short charging die # 90668.
Lee resizing lubricant is required with this die set.
Winter 2024:
It has come to our attention that 5.7 x 28 brass is now potentially fully annealed from case mouth to rim. This causes many issues with the reloading process.
Our suggestion is to use LEE Resizing Lubricant and our FN shell holder. The rims are so soft that they cannot be resized with a standard universal shell holder, as the brass rims deform, and are pushed down into the .260" relief hole, that is used for priming. We have introduced a FN shell holder #92183 for resizing this brass. The FN shellholder cannot be used to re-prime brass, you will need to use the standard #15 shellholder to do this. We have also seen that the primers are staked or crimped into position. This maybe due to the brass being so soft, that it does not have the ability to hold the primer into position, via a slight press fit.
The quick trim die uses a plastic bushing to provide a slight interference fit on the body of the cartridge to hold it stationary while trimming. This new brass is so soft, the plastic bushing is deforming the brass. If this happens to you, return your die body to the factory at the address below, and we will ream the bushing out to the largest allowable dimension to prevent damage to these soft cases.
With your return, please fill out the form here.
Our address:
Lee Precision, Inc.
4275 County Road U
Hartford, WI 53027
Click here to view parts
Lee 4.6x30 Very Ltd. Production Steel 2-Die Set. Includes Full Length Sizing Die, Bullet Seating & Crimping Die, Universal Shell Holder and instructions.
Please note: load data does not ship with this reloading die set. Contact your favorite powder manufacturer for load data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 25 ACP Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 30 M1 Carbine Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: due to the case taper, Lee case resizing lubricant is recommend for this cartridge.
Click here to view parts
Lee 30 Luger Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 30 Mauser Steel 3-Die Set. Includes Full Length Sizing Die,Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 30 Super Carry Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, and Instructions/Load data.
Click here to view parts
Lee 7.62 x 25 Tokarev Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 7.62 Nagant Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder and Instructions.
Load data is not available for this cartridge, please contact your favorite powder manufacturer for data.
Note: these dies were designed and manufactured for MidwayUSA. Before ordering these dies, please reference this knowledgebase article.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 32 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 32 S&W Long Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
This die set can be used to reload the 32 H&R Magnum. 32 H&R Magnum Load data may be ordered through this linkor referenced in our Modern Reloading manual.
Click here to view parts
Lee 32 H&R Mag Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: this die set can also be used to reload 327 Federal Mag. Load data for the 327 Federal Mag is included inside our Modern Reloading manual.
Click here to view parts
Lee 32/20 Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 38-40 Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Please note: Lee dies size to minimum headspace so your brass does not get over-worked and maintains accuracy. If you have issues chambering sized cases in your antique firearm, you may send in your sizing die along with 3 fired cases for a headspace adjustment. There is no charge for this service.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 9x21 Pistol Steel 3-Die Set includes Steel Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, and Instructions.
Note: load data does not ship with this reloading die set. Contact your favorite powder manufacturer for load data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 9MM Makarov Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 9mm Luger Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 9mm Luger Pistol Breech Lock 3-Die Set includes colored spline drive breech bushings for easy die identification, Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 9mm Luger Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 9mm Luger Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 357 Sig Pistol 3-Die Set includes Steel Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 38 Short and Large Colt Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 38 ACP/Super Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: This die set can also be used to reload 38 Colt NP, 38 S&W, 9mm Largo and 9x23. You will need to obtain loading data from your favorite powder manufacturer for these cartridges.
Click here to view parts
Lee 38 ACP/Super Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 380 Auto Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 380 AUTO (ACP) Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 380 Auto Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 380 AUTO (ACP) Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 38 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 38 Special / 357 Magnum Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: You may use the 38 Special die set to reload for the 357 Magnum and 357 Maximum. You would have to back out the Powder Thru Expander Die, and the Bullet Seating and Crimping Die about 2 turns to compensate for the longer 357 Magnum case, additional adjustments needed for 357 Maximum. Load data for the 357 Mag and 357 Max are available in Modern Reloading.
Click here to view parts
Lee 38 Special | 357 Magnum Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for 38 Special and 357 Magnum.
Note: You may use the 38 Special die set to reload for the 357 Magnum and 357 Maximum. You would have to back out the Powder Thru Expander Die, and the Bullet Seating and Crimping Die about 2 turns to compensate for the longer 357 Magnum case, additional adjustments needed for 357 Maximum. Load data for the 357 Max is available in Modern Reloading.
Click here to view parts
Lee 38 Special / 357 Magnum Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: You may use the 38 Special die set to reload for the 357 Magnum and 357 Maximum. You would have to back out the Powder Thru Expander Die, and the Bullet Seating and Crimping Die about 2 turns to compensate for the longer 357 Magnum case, additional adjustments needed for 357 Maximum. Load data for the 357 Mag and 357 Max are available in Modern Reloading.
Click here to view parts
Lee 40 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: can be used to load the 10mm Auto. Back out the bullet seating die and powder through expanding die 1 3/4 turns. 10mm Load Data is found in "Modern Reloading" or available for purchase here. Can also be used to reload the 41 Action Express. The powder through expander and bullet seating die would have to be backed out approximately two turns. The load data included with the dies can not be used with the 41 Action Express, it would have to be obtained through one of your favorite powder manufacturers.
Click here to view parts
Lee 40 S&W | 10mm Auto Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for the 40 S&W and 10mm Auto.
Note: can be used to load the 10mm Auto. Back out the bullet seating die and powder through expanding die 1 3/4 turns. Can also be used to reload the 41 Action Express. The powder through expander and bullet seating die would have to be backed out approximately two turns. The load data included with the dies can not be used with the 41 Action Express, it would have to be obtained through one of your favorite powder manufacturers.
Click here to view parts
Lee 40 S&W Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: can be used to load the 10mm Auto. Back out the bullet seating die and powder through expanding die 1 3/4 turns. 10mm Load Data is found in "Modern Reloading" or available for purchase here. Can also be used to reload the 41 Action Express. The powder through expander and bullet seating die would have to be backed out approximately two turns. The load data included with the dies can not be used with the 41 Action Express, it would have to be obtained through one of your favorite powder manufacturers.
Click here to view parts
Lee 40 S&W | 10mm Auto Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: can be used to load the 10mm Auto. Back out the bullet seating die and powder through expanding die 1 3/4 turns. Can also be used to reload the 41 Action Express. The powder through expander and bullet seating die would have to be backed out approximately two turns. The load data included with the dies can not be used with the 41 Action Express, it would have to be obtained through one of your favorite powder manufacturers.
Click here to view parts
Lee 41 Magnum Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 429 Desert Eagle Pistol 3-Die Set includes Steel Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, and instructions.
Note: load data is not available for this cartridge, contact your favorite powder manufacturer for data.
Click here to view parts
Lee 44 Special / 44 Magnum Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: These dies can be used to reload 44 Magnum and 445 Super Mag. 44 Magnum load data is available in Modern Reloading or by ordering 44 Magnum instruction sheet.
Click here to view parts
Lee 44 Special and 44 Magnum Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for both the 44 Special and 44 Magnum.
Note: These dies can be used to reload 44 Magnum and 445 Super Mag. Contact your favorite powder manufacturer for 445 Super Mag reloading data.
Click here to view parts
Lee 44 Special / 44 Magnum Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for both the 44 Special and 44 Magnum. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: These dies can be used to reload the 44 Magnum and 445 Super Mag. 44 Magnum reloading data may be purchased here, 445 Super Magnum load data would need to be obtained from your favorite powder manufacturer.
Click here to view parts
Lee 44 Special and 44 Magnum Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data for the 44 Special and 44 Magnum. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: these dies can be used to reload the 445 Super Mag, contact your favorite powder manufacturer for load data.
Click here to view parts
Lee 44 Russian Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 44/40 Steel 3-Die Set. Includes Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Please note: Uberti has cut the shoulder in their weapons .050 shorter than SAAMI specs. Shorten resizing die head space .050".
If you find your reloaded .44-40 cartridges will not chamber in your Uberti weapons, it is not the dies. Uberti has decided to cut the .44-40 chambers to a standard other than SAAMI. The shoulder in the chamber is .050" closer to the breech face. If you return the resizing die to the factory, we will adjust it for you at no charge.
Our address:
Lee Precision
4275 County Road U
Hartford, WI 53027
Click here to view parts
Lee 45 Colt Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
This set can also be used to load the 454 Casull. Load data is available in Modern Reloading for this cartridge, or you may order a 454 Casull load data.
Click here to view parts
Lee 45 Colt Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Note: this set can also be used to load the 454 Casull. Load data is available in Modern Reloading for this cartridge or you may order a 454 Casull instruction sheet.
Click here to view parts
Lee 45 Colt Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: This set can also be used to load the 454 Casull. Load data is available in Modern Reloading for this cartridge or you may order a 454 Casull instruction sheet.
Click here to view parts
Lee 45 Colt Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Note: this set can also be used to load the 454 Casull. Load data is available in Modern Reloading for this cartridge or you may order a 454 Casull instruction sheet.
Click here to view parts
Lee 45 Colt Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
This set can also be used to load the 454 Casull. Load data is available in Modern Reloading for this cartridge, or you may order a 454 Casull load data.
Click here to view parts
Lee 45 ACP Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 45 ACP Pistol 4-Die Set. Includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 45 ACP Pistol Breech Lock 3-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 45 ACP Pistol Breech Lock 4-Die Set includes colored Smart Lock bushings for easy die identification, Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data. Select this die set if you are reloading mixed range brass and have the Breech Lock Quick Change feature on your reloading press.
Click here to view parts
Lee 45 Auto Rim Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 45 S&W Schofield Pistol 3-Die Set include Carbide Full Length Sizing Die, Powder Through Expanding Die Bullet Seating Die, Unviersal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 400 Cor-Bon Pistol 3-Die Set includes Steel Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder and Instructions.
Note: Load data is not included, please contact your favorite powder manufacturer for data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 455 Webley Mark II Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 45 Win Mag Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 454 Casull Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 45 Gap Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 460 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 480 Ruger Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder # 5 (fits Remington or Peters brass), Powder Dipper and Instructions/Load Data.
Please note, if using Hornady brass, you will need to purchase a #16 shell holder to use with your reloading press.
This set can be used to load the 475 Linebaugh. Load data for this cartridge is available in Modern Reloading.
Click here to view parts
Lee 50 AE Pistol 3-Die Set includes Steel Full Length Sizing Die, Powder Through Expanding Die,Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Lee resizing lubricant is required with this die set.
Click here to view parts
Lee 500 S&W Mag or 500 Auto Max Pistol 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Click here to view parts
Lee 50 Beowulf 4-Die Steel Set. Includes a Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Taper Crimp Die, Universal Shell Holder and Instructions.
Note: load data is not available for this cartridge, contact your favorite powder manufacturer for data. The powder dipper that is supplied is to hold the shell holder in the box in place.
3-Die Carbide Set
Lee Handgun Carbide 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Breech Lock Carbide 3-Die Set
Lee Handgun Breech Lock Carbide 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, with color-coded Smart Lock bushings factory installed. Universal Shell Holder, Powder Dipper, instructions and load data also included.
3-Die Steel Set
Lee Handgun 3-Die Set includes steel Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, and Instructions. Resizing lubricant is required with this die set:
4-Die Carbide Set
Lee Handgun 4-Die Carbide Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, and Instructions. Please note, there is no load data available yet for this cartridge from the powder manufacturer's, a dipper will not be included.
Breech Lock Carbide 4-Die Set
Lee Handgun Breech Lock Carbide 4-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Factory Crimp Dies, with color-coded Smart Lock bushings factory installed. Universal Shell Holder, Powder Dipper, instructions and load data also included.
WARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov
WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.